CNC Turning Lathes

Machine Characteristics

• STT (Slant Turret Tail Stock ) a rigid and Compact Design
• True Align True Slant Mono Structure high Quality High Graded Cast Bed » Best Coolant and Chip Management
• Adjustable operator Panel
• High speed Bi-Direction Turret
• Cylinderical roller Type LM Guideways
• Automatic Tail Stock with Cylindercial Roller LM Guideways to help easy Setup and best Run out Control for Longer shafts
• Cartridge Type Spindle

STT Smart Machine Designs to fulfil different requirements like heavy Cuts, High Accuracy and High Productivity.

Here STT Series, a True Slant Monoblock Series, is Designed with 8 Station Bi-direction Turret and Tail Stock. Big Length Machines are occupied with Automatic Tail Stock Moving with Hydraulic Cylinder on Lm Guideways.

 <...

Machine Characteristics

• STT (Slant Turret Tail Stock ) a rigid and Compact Design
• True Align True Slant Mono Structure high Quality High Graded Cast Bed » Best Coolant and Chip Management
• Adjustable operator Panel
• High speed Bi-Direction Turret
• Cylinderical roller Type LM Guideways
• Automatic Tail Stock with Cylindercial Roller LM Guideways to help easy Setup and best Run out Control for Longer shafts
• Cartridge Type Spindle

STT Smart Machine Designs to fulfil different requirements like heavy Cuts, High Accuracy and High Productivity.

Here STT Series, a True Slant Monoblock Series, is Designed with 8 Station Bi-direction Turret and Tail Stock. Big Length Machines are occupied with Automatic Tail Stock Moving with Hydraulic Cylinder on Lm Guideways.

Monoblock Bed Structure designed for enhanced accuracy and Right Angle, which is very helpful in achieving the best angle and Parallelism wrt face.

Details

• STT165  : Chuck Size 6 inch Max length 300mm
• STT200 : Chuck Size 8 inch  Max Length 500mm
• STT 250 : Chuck Size 10 inch Max Length 500/750mm
• STT400 : Chuck Size 16 inch Max length 1500mm

Machine Characteristics

• CLS (Chucker Lathe Slant bed) Designed for Chucking Components to achieve high production With maintained accuracy level » True Slant True Align Mono Cast bed
• Best Coolant and Chip Management
• Available in different kind Tooling Options Like Linear Gang and Bi-Directional Turret
• Available in Linear Motion Guideways and Hard Guideways
• Cartridge Type Spindle

In Gang Tool Chucker we have Flat as well as Slant bed Monoblock models. As Gang Tools has more accuracy ,fast productivity ,Long Life and Low cost ,we introduced it for small as well as bih chucking Components . Smart Machine Designs to fulfil different requirements like heavy Cuts, high Accuracy and High Productivity .Here CLF is for flat bed and CLS Slant bed Chucker lathe. CLF/CLS Chuck Size 6 inch Max lengt...

Machine Characteristics

• CLS (Chucker Lathe Slant bed) Designed for Chucking Components to achieve high production With maintained accuracy level » True Slant True Align Mono Cast bed
• Best Coolant and Chip Management
• Available in different kind Tooling Options Like Linear Gang and Bi-Directional Turret
• Available in Linear Motion Guideways and Hard Guideways
• Cartridge Type Spindle

In Gang Tool Chucker we have Flat as well as Slant bed Monoblock models. As Gang Tools has more accuracy ,fast productivity ,Long Life and Low cost ,we introduced it for small as well as bih chucking Components . Smart Machine Designs to fulfil different requirements like heavy Cuts, high Accuracy and High Productivity .Here CLF is for flat bed and CLS Slant bed Chucker lathe. CLF/CLS Chuck Size 6 inch Max length 200

Details

• CLF/CLS 200 : Chuck Size 8 inch Max Length 300mm
• CLF/CLS 250 : Chuck Size 10 inch Max Length 500mm
• CLF 300 : Chuck Size 12 imch Max length 500mm

Machine Characteristics

• FTT (Flatbed Turret Tail Stock) best design for Chucking and longer Shaft parts
• Less deflection as bed and saddle on the same angle without any packed carriage » High-Quality High Graded Cast Bed
• Center Bal screws unlike ordinary designs
• Telescopic and Full Guarded ball Screw and Guideways
• Best Coolant and Chip Management
• Bi-Directional Turret » Linear Motion Guideways
• Tail Stock With Add on Rotating Center and hydraulic Quill
• Cartridge Type Spindle

FTT Smart Machine Designs to fulfil different requirements like heavy Cuts, High Accuracy and High Productivity. Here FTT Series, a Flatbed Series, is Designed with 8 Station Bi-direction Turret and in line Tail Stock. Its Centralized ball Screw, Direct Mounted XZ Servo Motor and Ac Syn Se...

Machine Characteristics

• FTT (Flatbed Turret Tail Stock) best design for Chucking and longer Shaft parts
• Less deflection as bed and saddle on the same angle without any packed carriage » High-Quality High Graded Cast Bed
• Center Bal screws unlike ordinary designs
• Telescopic and Full Guarded ball Screw and Guideways
• Best Coolant and Chip Management
• Bi-Directional Turret » Linear Motion Guideways
• Tail Stock With Add on Rotating Center and hydraulic Quill
• Cartridge Type Spindle

FTT Smart Machine Designs to fulfil different requirements like heavy Cuts, High Accuracy and High Productivity. Here FTT Series, a Flatbed Series, is Designed with 8 Station Bi-direction Turret and in line Tail Stock. Its Centralized ball Screw, Direct Mounted XZ Servo Motor and Ac Syn Servo Spindle. XZ Both Slides are Covered with Telescopic Covers.

The Same angle of Z And axis making it more accurate than a Two-piece Saddle which is very helpful in achieving the best angle and Parallelism wrt face. It’s designed by considering best Chip management and longer parts like Shafts, Axles and Pipes.

Details

FTT 165

Chuck Size: 6 inch

Max Length: 400mm

FTT200

Chuck Size: 8 inch

Max Length: 75Omm

FTT 250

Chuck Size: 10 inch

Max Length 750/1000Mm

FTT400

Chuck Size: 16 inch

Max Length: 1500/2000mm

Machine Characteristics

• AL (Auto Loader Lathes ) Understanding requirements of future ,Making Production more Efficient and Constant and Controlled rejection Level and to avoid difficulty in Speed of loading Small Parts
• Different kind Auto Loaders according to input material variations and Volume
• Easy to change Component and Program
• More Feasible and applicable » Less investment » Low maintenance Cost
• Integrated to machine no add on controller » No Need to appoint different Operator , Programmer or Electric Supply.
• Increased Productivity and Tool Life » Available in Flat and Slant Bed
• Suitable for Bar as well as Chucking Components
• Easy To Operate and maintain » Best Coolant and Chip Management
• Available in different kind Tooling Options Like Linear Gang ...

Machine Characteristics

• AL (Auto Loader Lathes ) Understanding requirements of future ,Making Production more Efficient and Constant and Controlled rejection Level and to avoid difficulty in Speed of loading Small Parts
• Different kind Auto Loaders according to input material variations and Volume
• Easy to change Component and Program
• More Feasible and applicable » Less investment » Low maintenance Cost
• Integrated to machine no add on controller » No Need to appoint different Operator , Programmer or Electric Supply.
• Increased Productivity and Tool Life » Available in Flat and Slant Bed
• Suitable for Bar as well as Chucking Components
• Easy To Operate and maintain » Best Coolant and Chip Management
• Available in different kind Tooling Options Like Linear Gang and Bi-Directional Turret
• Gantry, Bar feeder and Plc Auto loader to meet various applications
• Available in Linear Motion Guideways

Automation is the future ,So we are working hard to eliminated problems occuring during long run of Autoloading Unloading.By reaching close to automation perfection we have designed two Series AL and GL to meet Autoload different kind of Components .AL is Plc +pneumatic driven both side turning Solution While GL is integrated Gantry Loading machine With Pneumatic Clamp Support to avoid misclamp or loose clamp incase of raw material variation.

How different than other Auto-loading machines in Market?

Our AL is very fast and trouble free machine ,which saves cost and time.Its best Suitable for Bush, Pin ,Nut and other parts where machining at both sides but Tools required to make component is less than 4.This machine is Gang Tool Machine with 400mm X travel ,Loading Tray ftom front and a belt parts conveyor for discharge supported with ejector .Its performing well in bath fitting ,hydro hose fittings as well as Autoparts.Here is no complex program ,u can make it active with one M code ,all other cycles will be automatically completed .However during new part setting you need to Set loader postion once accotding to length.For Example if you are makimg 40mm by 100 mm long wotk piece and next set is for 200 mm long ot 300mm long Work piece you have to roughly move loader postion handle once to make loadee approachable.

Its easy to change component by just changing gripper collet and main collet according To diameter 

GL is Fully packed with gantry ,Ejector ,Parts catcher ,Component pushing cylinder.Its available with 8 Tool Turret as well as Gang Tools.This machine has integrated gantry ,no extra standalone pannel, No extra Programmer or Technician ,No UPS required.It automatically Start and stops with machine .You can enable its cycle by a M code. High Precision LM guide and Ball Screw for gantry left right move to match clamp postion incase of premachined parts.However Raw parts cant be loaded only by putting gantry position to chuck as thickness may vary and cause accident so to over come this limitation we have added extra clamp cylinder to make it easy .To Save gantry Move time to putachined part back or in other hand we have installed Extra parts catcher which also can be engaged if you dont want to use gantry hand for unclamp .

Details

AL-50

Max Dia: 50mm, Max Length: 120mm, Max Loadings unloadings Per minute: 25

GL150

Max Dia: 100, Max length: 80mm, Max Loadings Per Minute: 15